divetore.blogg.se

Parker crossbow cocking rope
Parker crossbow cocking rope








parker crossbow cocking rope
  1. #Parker crossbow cocking rope how to#
  2. #Parker crossbow cocking rope manual#

Shooting straight every time requires you to cock the crossbow straight every time. Never switch off the safety unless an arrow is mounted in a shooting position on the crossbow and you are ready to shoot. You should follow this safety measure even if you do not have an arrow loaded, in case of an accidental dry fire. Using a cocking device rather than doing it by hand will make it easier to ensure consistent string placement.Īlways keep the crossbow’s front end pointed in a safe direction downrange while cocking. This will foster consistent accuracy downrange. Mark the string with a marker on each side of the rail for a visual cue of a centered string. If you cock manually or use a cocking device, you must take care to maintain the string in the same evenly centered trigger-latch position each time you cock. You will need to lean to the side because the stock is too long for you reach the string. If you cock a longer recurve crossbow, however, you can’t simply bend over the stock to do it. Manually pulling back the string requires putting your hands, arms, legs and lower back into the pull. Here are a few points to be aware of while cocking your crossbow:

#Parker crossbow cocking rope manual#

It’s very important to check your crossbow manual to see if you need to engage it manually before cocking your crossbow. Some models will engage the safety automatically. Once your crossbow is cocked, switch the safety off the fire position. Draw the string evenly along both sides of the barrel to the latching and safety mechanism until it is cocked in place. Using a cocking device is also an option. Step 3: Pull the string backīend over the stock and manually draw the string back. When you’re manually cocking a crossbow, putting the ball of your foot in the stirrup will help prevent slippage while cocking. Step 2: Place the ball of either foot in the cocking stirrup The safety is usually located on the side of your crossbow or can be found on the rear of the sight bridge. Step 1: Move the safety to the “fire” position Cocking devices can make it easier to ready your crossbow and improve accuracy, but similar basic steps must be followed whether you do it manually or use a cocking device. The same basic process applies to recurve, compound, and reverse compound crossbows alike.

#Parker crossbow cocking rope how to#

Learning how to cock a crossbow is no exception to this rule. It takes practice and repetition to master any skill.

  • Step 2: Place the ball of either foot in the cocking stirrup.
  • Step 1: Move the safety to the “fire” position.









  • Parker crossbow cocking rope